Posted inFeatured
Posted inadvanced_concepts
Methods of operating crushers
There are two distinct methods of feeding material to a crusher. The first, known as free…
Posted inadvanced_concepts
Energy utilisation
One of the first important investigations into the distribution of the energy fed into a…
Posted inadvanced_concepts
SIZE REDUCTION OF SOLIDS
Introduction In the materials processing industry, size reduction or comminution is usually carried out in order to…
Posted inadvanced_concepts
Centrifugal separators
The use of cyclone separators for the removal of suspended dust particles from gases is…
Posted inadvanced_concepts
Gravity settling
The settling tank Material is introduced in suspension into a tank containing a relatively large…
Posted inadvanced_concepts
CLASSIFICATION OF SOLID PARTICLES
Introduction The problem of separating solid particles according to their physical properties is of great…
Posted inadvanced_concepts
BLENDING OF SOLID PARTICLES
In the mixing of solid particles, the following three mechanisms may be involved: A. Convective mixing,…
Posted inadvanced_concepts
Measurement and control of solids flowrate
The flowrate of solids can be measured either as they leave the hopper or as…
Posted inadvanced_concepts
Flow of solids through orifices
The discharge rate of solid particles is usually controlled by the size of the orifice…
Posted inadvanced_concepts
Flow of solids in hoppers
Solids may be stored in heaps or in sacks although subsequent handling problems may be…